Single cylinder piston type Pressure Grouting Machine small type
Pressure Grouting Machine
Work Preparation of Pressure Grouting Machine:
After the pump has been stopped or reinstalled for a long time, the following preparations must be made before starting.
1. Check the sufficiency of lubricating oil in the gearbox (lubricating oil should be injected into the gearbox to the viewing hole of the oil window when it is first used).
2. Check the fastening and loosening of all parts, especially the screw tightening of rubber piston locking nut, cross head and tie rod. Whether the moving parts are blocked or not, and whether the rotation is flexible.
3. Check whether the filter, suction pipe and discharge pipe are unblocked.
4. Check whether the joints of the pipelines are firm and tight, whether there is leakage or leakage.
Technical parameters of Pressure Grouting Machine:
| Cylinder number | 1 |
| Bore diameter | 80mm |
| Piston stroke | 90mm |
| Diameter of suction pipe | 51mm |
| Diameter of outlet pipe | 32mm |
| Motor power | 5.5 kw |
| Main shaft speed | 1440 r/min |
| Working pressure | 5 Mpa |
Structure of Pressure Grouting Pump:
Chemical Grout Injection Pump is mainly composed of pump body, pump frame, air chamber, shock-resistant pressure gauge, motor, V-belt and pulley cover.
The installation foundation of cement grouting pump should be smooth and not inclined.
The pump is fixed on the foundation with the foot screw to prevent the vibration of the pump during operation.
Preparations before pumping of Pressure Grouting Pump:
After the pump has been stopped or reinstalled for a long time, the following preparations must be made before starting.
1. Check whether there is enough lubricating oil in each part.
2. Check whether the suction pipe of the filter is unblocked.
3. Check whether there is obstruction in the movement of each part.
4. Check the accuracy and reliability of the transmission mechanism.
5. Check the looseness of fasteners, especially the screw tightening of rubber piston locking nut, cross head and piston rod connection thread.
6. Check the suction height of the pump. The maximum suction height of the pump should not exceed 2.5 meters in areas below 1000 meters above sea level. In areas above 1000 meters above sea level, the suction height of the pump should be reduced according to the local atmospheric pressure reduction.
7.Check the position of the filter immersed in the mud tank. Generally, the mud level should be below 0.3-0.5 meters, and the filter should be no less than 0.5 meters away from the bottom of the mud tank.
Pictures of Pressure Grouting Pump:
Product Tags:
|
|
Piston Cement Pressure Grouting Machine Single Cylinder Small Grout Pump Images
|
